Notice of Issue, Amendment and Revocation of Acceptable Solutions and Verification Methods for Building Code Clauses B1, B2, C1–C6, E2, G4, G12 and G13 and Associated Materials Incorporated by Reference
Pursuant to section 24(1) of the Building Act 2004 (“Act”), I give notice that the following Acceptable Solutions are to be revoked and will cease having legal effect on 31 October 2019:
Pursuant to section 24(1) of the Act, I give notice that the following Acceptable Solution and Verification Method have been issued come into force on 27 June 2019:
Pursuant to section 24(1) of the Act, I give notice of amendments to the following Acceptable Solutions and Verification Methods:
The amended versions of the above Acceptable Solutions and Verification Methods come into force on 27 June 2019. The preceding versions continue to be in force until 31 October 2019.
The Acceptable Solutions and Verification Methods can be downloaded free of charge from the Ministry of Business, Innovation and Employment (“MBIE”) website: www.building.govt.nz/building-code-compliance.
Pursuant to sections 405 and 410(1)(e) of the Act, I give notice that the following materials are to be incorporated by reference into the following Acceptable Solution and Verification Method on 27 June 2019:
Acceptable Solution B1/AS1
NASH Standard Part 2: May 2019
Acceptable Solution B2/AS1
NASH Standard Part 2: May 2019
Acceptable Solution C/AS2
NZS/BS 476.21:1987
NZS/BS 476.22:1987
AS/NZS 1668.1:1998 Amend 1
AS/NZS 2918:2001
AS/NZS 3837:1998 Amend 1
NZS 4232.2:1988
NZS 4332:1997
NZS 4510:2008 Amend 1
NZS 4512:2010
NZS 4515:2009
NZS 4520:2010
NZS 4541:2013
AS/NZS 5601.1:2010 Amend 1
AS/NZS 60598.2.2:2001 Amend AA
AS 1366.1:1992 Amend 1
AS 1366.2:1992
AS 1366.3:1992 Amend 1
AS 1366.4:1989
AS 1530.1:1994
AS 1530.2:1993
AS 1530.4:2005
AS 1682.1:1990
AS 1682.2:1990
AS 1691:1985
AS 4072.1:2005 Amend 1
AS 4254.1:2012
AS 4254.2:2012
AS ISO 9705:2003
ISO 5660.1:2002
ISO 5660.2:2002
ISO 9239.1:2010
ISO 9705:1993
BS EN 12101.1:2005
EN 13501.1:2007 Amend 1
NFPA 285:2012
ASTM D2898:2010
Verification Method B1/VM1 Structure – General, First Edition, Amendment 17
Verification Method C/VM2 Protection from Fire – Framework for Fire Safety Design, First Edition, Amendment 5
Acceptable Solution D1/AS1 Access Routes, Second Edition, Amendment 6
Verification Method F3/VM1 Hazardous Substances and Processes, Second Edition, Unamended
Acceptable Solution F4/AS1 Safety from Falling, Third Edition, Amendment 2
Acceptable Solution F7/AS1 Warning Systems, Fourth Edition, Unamended
Acceptable Solution F8/AS1 Signs, Second Edition, Amendment 4
Acceptable Solution BCH/AS1 Backcountry Huts, First Edition, Amendment 1
Education (Early Childhood Services) Regulations 2008
Hazardous Substances and New Organisms Act 1996
Health and Safety at Work (Hazardous Substances) Regulations 2017
Australian Building Codes Board: National Construction Code (NCC) 2015
Verification Method E2/VM2
BRANZ Evaluation Method EM7 [Version 2, May 2019]
AS/NZS 4284:2008
Acceptable Solution G13/AS1
Acceptable Solution C/AS2 Protection from Fire – Acceptable Solution for Buildings other than Risk Group SH, First Edition, 27 June 2019
Pursuant to sections 406(c)(ii) and 410(1)(e) of the Act, I give notice of amendments to material incorporated by reference into the following Acceptable Solutions and Verification Methods on 27 June 2019. The material incorporated by reference in column 1 of the table below, is replaced by the material listed in column 2:
Column 1 |
Column 2 |
G4/AS1 |
|
Department of Labour (Occupational Safety and Health), Workplace Exposure Standards and Biological Exposure Indices 7th Edition |
Worksafe New Zealand, Workplace Exposure Standards and Biological Exposure Indices 10th Edition, November 2018 |
G12/VM1, G12/AS1 |
|
AS/NZS 3500.1:2015 Amend 1 |
AS/NZS 3500.1:2018 |
G12/VM1, G12/AS2 |
|
AS/NZS 3500.4:2015 Amend 1 |
AS/NZS 3500.4:2018 Amend 1 |
G13/VM2. G12/AS1, G12/AS2, G12/AS3 |
|
AS/NZS 3500.2:2015 Amend 1, 2 |
AS/NZS 3500.2:2018 |
The materials incorporated by reference described above may be purchased, or are freely available, from Standards New Zealand, MBIE, 15 Stout Street, Wellington 6011, or online from the relevant organisation as follows:
Material incorporated by reference is available for inspection free of charge at 15 Stout Street, Wellington, between the hours of 8.30am and 5.00pm, Monday to Friday. To make an appointment to view material incorporated by reference, call 0800 242 243.
Dated at Wellington this 26th day of June 2019.
ANNA BUTLER, General Manager, Ministry of Business, Innovation and Employment.