Gazette.govt.nzApplications Advertised for Objection
Closing Date for Objections 13 October 2015
- Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection should do so in writing, to the New Zealand Customs Service, Attn: Valuation, Origin and Classification section, PO Box 29, Shortland Street, Auckland 1140. Email: voc@customs.govt.nz, before 13 October 2015. All submissions should include:
- the Tariff Concession (Advertisement) Notice number;
- the Tariff item; and
- reference number.
- All submissions from local New Zealand manufacturers should include:
- the range of suitable alternative goods made locally in New Zealand;
- the grounds on which objection is made (including reasons why the locally produced or manufactured good is a suitable alternative);
- present and potential output;
- details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.
- Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the New Zealand Customs Service quoting the details in paragraph 1 above.
|
SCHEDULE |
|||||||||
|
Tariff |
Proposed Tariff Concession |
Name and Address |
Part |
Appn |
*Category |
||||
|
39.17) |
Face shields, designed for safety, with or without respiratory protection; including parts and components, imported together with face shields or separately, excluding parts for general use |
BOC Limited |
99 |
310282D |
A |
||||
|
39.17) |
Parts and components, of welding masks and helmets of 39.26 and 65.06, excluding parts for general use |
BOC Limited |
99 |
310281F |
A |
||||
|
3923.29.15 |
Printed retort pouches suited for use in the packaging of foodstuffs, for own use in manufacture by Leaderbrand Produce Limited |
Leaderbrand Produce Limited |
99 |
310302B |
IM |
||||
|
4016.93.00 |
Pressure pipe composite seal, comprising synthetic rubber seal with an integrated plastic reinforcement |
Iplex Pipeline NZ Limited |
99 |
310293K |
A |
||||
|
|
CURRENT APPROVAL: EXCLUDING: Carbon steel round stranded wire and rope of tensile grades 350 to 2050 MPa, bright or coated of the following constructions: (1) One strand of 3-37 wires 1.2mm to 16mm diameter, inclusive (2) Three strand (excluding core): (a) Not compacted of 1.5mm to 38mm diameter, inclusive (b) Compacted of 3.0mm to 32mm diameter, inclusive (3) Four strand (excluding core): (a) Not compacted of 2.0mm to 35mm diameter, inclusive (b) Compacted of 9.00mm to 35mm diameter, inclusive (4) Six strand (excluding core): (a) Not compacted of 1.5mm to 56mm diameter, inclusive (b) Compacted of 9.00mm to 44mm diameter, inclusive (5) Eight strand elevator rope with fibre (natural or synthetic) or steel core from 8mm–19mm diameter, inclusive Note: Ropes 7mm diameter and less, described as 7 × 7, or 7 × 19, having a central main core of the same construction as the outer strands are NOT admissible under this concession |
|
99 |
987121H |
A |
||||
|
|
REQUESTED APPROVAL: |
D M Standen Limited |
99 |
310298L |
M |
||||
|
73.26 |
Steel formwork, control joints and elements; of a kind used in the construction of concrete floors, walls and ceilings |
Fletcher Steel Limited |
99 |
310294H |
A |
||||
|
Category of Application: |
A |
– |
General Approval |
Dated at Auckland this 16th day of September 2015.
ALAN J. MASTERS, New Zealand Customs Service.