Applications Advertised for Objection
Closing Date for Objections 19th February 2013
1 Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection should do so in writing, to the New Zealand Customs Service, Att: Valuation, Origin and Classification section, PO Box 29, Shortland Street, Auckland 1140, email voc@customs.govt.nz, before 19th February 2013. All submissions should include:
- the Tariff Concession (Advertisement) Notice number;
- the Tariff item; and
- Reference number.
2 All submissions from local New Zealand manufacturers should include:
- the range of suitable alternative goods made locally in New Zealand;
- the grounds on which objection is made (including reasons why the locally produced or manufactured good is a suitable alternative);
- present and potential output;
- details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.
3 Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the New Zealand Customs Service quoting the details in paragraph 1 above.
SCHEDULE
Part Appn. *Category
Tariff Name and Address 2 Ref. of
Item Proposed Tariff Concession of Applicant Ref. No. Appn.
1504.20.09 Fish oil 18/12 TG (18% area percentage of Eicosapentaenoic acid (EPA) and Alpha Laboratories 99 303428D A
12% area percentage of Docosahexaenoic acid (DHA), in triglyceride form (TG)), C/- Kuehne & Nagel Ltd
derived from species of anchovy and/or sardines, excluding fish oil presented in PO Box 53041
soft-gel capsules AUCKLAND AIRPORT 2150
3405.90.00 Metal Polish EIF International 99 303471C A
PO Box 97727
Manukau
AUCKLAND 2241
5703.30.09 Tufted polyester mats, having a polyester pile tufted into nonwoven substrate with Deane Apparel 99 303459D A
a nitrile rubber backing, in sizes 60.96cm x 91.44cm (2’ x 3’), 91.44cm x PO Box 76217
121.92cm (3’ x 4’), 91.44cm x 152.4cm (3’ x 5’), 121.92cm x 182.88cm (4’ x 6’), Manukau City
121.92cm x 243.84cm (4’ x 8’), or 91.44cm x 304.8cm (3’ x 10’) AUCKLAND
Sections V, VI, Plant, equipment and materials, including catalogued or identifiable parts, NZ Refinery Co Ltd. 99 303536A CE
VII, IX, XIII, for the Continuous Catalyst Regeneration Platformer (CCR) Project, also known T/a TMH Project,
XV, XVI and as the "New Venture Te Mahi Hou Project" (TMH Project) including CCR C/- PO Box 360
XVIII Platformer, waste heat boiler, compressors, debutaniser with steam reboiler, NEW PLYMOUTH
pressure vessels, and an electrical substation
CURRENT APPROVAL:
7217.20.90 Galvanised steel spring wire AS1472, excluding wire up to 4.00mm in diameter 99 999172H M
REQUESTED APPROVAL:
7217.20.90 Galvanised steel spring wire to Australian Standard AS1472, excluding wire up Robertson Engineering Ltd 99 303437C M
to 2.00mm in diameter C/- PO Box 30314
Lower Hutt
WELLINGTON 5040
8428.90.00 Hydraulically operated truck or utility tailgate lifts having two cylinders, APC Logistics (NZ) Ltd 99 303530B A
aluminium platforms, tilt assist, and of a lifting capacity exceeding 1,500kg PO Box 73054
AUCKLAND INTERNATIONAL AIRPORT
CURRENT APPROVAL:
8537.20.00 Gas insulated switchgear using SF6 gas as an insulating medium with either 99 987405E M
vacuum or SF6 as a breaking medium. Range 40.5KV to 362KV
REQUESTED APPROVAL:
8537.20.00 Gas insulated switchgear using SF6 gas as an insulating medium with either ABB Ltd 99 303531L M
vacuum, or SF6 as a breaking medium. Range 17.5kV to 552kV C/- PO Box 53004
AUCKLAND AIRPORT 2150
- Category of Application: A - General Approval
CE - Capital Equipment
IM - Inputs to Manufacturing - Inability to Supply
MS - Manufacturers’ Samples
RUC - Revocation of Unused Concession
S - Shortfall of Other Than Manufacturing Inputs
SMI - Shortfall of Manufacturing Inputs
SS - Special Situation
M - Modification of Existing Concession
W - Withdrawal of Concession
+ - Denotes amendment or addition
Dated at Auckland this 24th day of January 2013. A. J. NETTO, New Zealand Customs Service.