Pursuant to section 173(2)(c) of the Climate Change Response Act 2002, notice is given that the material proposed to be incorporated by reference into proposed regulations is as follows:
Climate Change (Stationary Energy and Industrial Processes) Regulations 2009 (Draft for Consultation)
1. GPA Standard 2166-05 Obtaining Natural Gas Samples for Analysis by Gas Chromatography.
2. ASTM D 1945 – 03 Standard Test Method for Analysis of Natural Gas by Gas Chromatography.
3. USEPA – Method 1A – Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts.
4. USEPA – Method 2 – Determination of Stack Gas Velocity and Volumetric Flow Rate (Type S Pitot Tube).
5. The Aluminium Sector Greenhouse Gas Protocol (Addendum to the WRI/WBCSD Greenhouse Gas Protocol) – October 2006 (produced by the International Aluminium Institute).
Climate Change (Unique Emissions Factors) Regulations 2009 (Draft for Consultation)
6. ISO 18283:2006(E) Hard coal and coke – Manual sampling.
7. ISO 1928:1995(E) Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value.
8. ISO 5068-1:2007(E) Brown coals and lignites – Determination of moisture content – Part 1: Indirect gravimetric method for total moisture.
9. ISO 1171:1997(E) Solid mineral fuels – determination of ash content.
10. AS 1038.6.4–2005 Coal and coke – Analysis and testing Part 6.4: Higher rank coal and coke – Ultimate analysis – Carbon, Hydrogen and nitrogen – Instrumental method.
11. ASTM D 3174 – 04 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal.
12. ISO 12902:2001(E) Solid mineral fuels – Determination of total carbon, hydrogen and nitrogen – Instrumental methods.
13. ASTM D 3302 – 07a ? – Standard Test Method for Total Moisture in Coal.
14. ASTM E 947 – 83 (Reapproved 2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis.
15. ASTM E 1675 – 04 ? Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis.
16. NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories.
17. ISO 4259:2006(E) Petroleum products – Determination and application of precision data in relation to methods of test.
18. ASTM D 5291 – 02 (Reapproved 2007) Standard Test Methods for Instrumental Determination of Carbon, Hydrogen and Nitrogen in Petroleum Products and Lubricants.
19. ASTM D 1298 – 99 (Reapproved 2005) Standard Test Method for Density, Relative Density (Specific Gravity), or
API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
20. ISO 3675:1998(E) Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method.
21. DD CEN/TS 14778-1:2005 Solid biofuels – Sampling – Part 1: Methods for sampling.
22. DD CEN/TS 15442:2006 Solid recovered fuels – Methods for sampling.
23. ASTM D 4057 – 06 Standard Practice for Manual Sampling of Petroleum and Petroleum Products.
24. ASTM D 4177 – 95 (Reapproved 2005) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products.
25. ISO 3170:2004(E) Petroleum liquids – Manual sampling.
26. DD CEN/TS 15407:2006 Solid recovered fuels – Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content.
27. DD CEN/TS 15400:2006 Solid recovered fuels – Methods for the determination of calorific value.
28. ASTM D 240 – 02 (Reapproved 2007) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter.
29. ISO 10780:1994(E) Stationary source emissions – Measurement of velocity and volume flowrate of gas streams in ducts.
30. ISO 14164:1999(E) Stationary source emissions – Determination of the volume flowrate of gas streams in ducts
– Automated method.
31. ISO 12039:2001(E) Stationary source emissions – Determination of carbon monoxide, carbon dioxide and oxygen
– Performance characteristics and calibration of automated measuring systems.
32. USEPA – Method 3A – Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure) (2006).
33. USEPA – Method 3C – Determination of Carbon Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources (1996).
34. ISO Guide 34 General requirements for the competence of reference material producers (2000).
35. ISO 5167-1:2003(E) Measurement of fluid flow by means of pressure differential devices inserted in circular
cross-section conduits running full — Part 1: General principles and requirements.
36. DD CEN/TS 15440:2006 Solid recovered fuels – Method for the determination of biomass content.
37. ASTM D6866 – 08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis.
Inspecting Proposed Material
All the material proposed to be incorporated by reference is available for inspection free of charge, week days between
9.00am and 5.00pm, from 2 June 2009 to 30 June 2009, at:
? the Ministry of Economic Development’s Head Office at Ground Floor, 33 Bowen Street, Wellington. Telephone: (04) 472 0030; or
? the Government Urban & Economic Development Office at Level 6, Tower Centre, 45 Queen Street, Auckland. Telephone: (09) 985 4800; or
? the Companies Office at the Southern Business Centre, 55 Wordsworth Street, Sydenham, Christchurch. Telephone: (03) 962 2600.
Purchase of Proposed Material
All materials may be purchased directly from:
Standards New Zealand
Radio New Zealand House
Level 10, 155 The Terrace (Private Bag 2439)
Wellington
NZS and ISO standards may be purchased online at
www.standards.co.nz (enter the name or number of the standard in the search panel)
All other materials may be purchased by freephone 0800 782 632, or by email
enquiries@standards.co.nz
Availability on the Internet
The materials numbered 3, 4, 5, 32 and 33 above are available online and free of charge from 10.00am on 2 June 2009 to at least 5.00pm on 30 June 2009 at
http://www.med.govt.nz/templates/climatechangestandards
Comment
I invite comment on the proposed incorporation of these materials by 30 June 2009.
All comments should be addressed to Ministry for the Environment, PO Box 10362, Wellington 6143, or can be emailed to
emissionstrading@climatechange.govt.nz
or sent by facsimile to (04) 439 7707.
Dated this 25th day of May 2009.
DAVID SMOL, Chief Executive, Ministry of Economic Development.