TARIFF CONCESSION APPROVALS, WITHDRAWALS AND DECLINES NOTICE (NO. 38) 2007

I, Vincent Anthony Manks, Executive Officer, Ministry of Economic Development, acting pursuant to section 8 of the Tariff Act 1988 under delegated authority hereby:

(a) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the First Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe
(b) In accordance with Part II of the Tariff approve in respect of the entry of goods listed in the Second Schedule to this notice the exemptions from duty specified in that Schedule with effect from the first day of the month so specified subject however to such purposes and conditions which I prescribe
(c) Withdraw with effect fourteen days from the date of this Gazette, or otherwise at the date so specified, the approvals granted in respect of the entry of goods listed in the Third Schedule to this notice
(d) Decline to approve in respect of the goods listed in the Fourth Schedule to this notice concessions for which application was made.


FIRST SCHEDULE
Concessions Approved
Part
Tariff Rates of Duty II Ref. Effective
Item Description of Goods Normal Pref. Ref. No. From To

A 2309.90.19 SeaBuck, being a dietary supplement for horses Free Free 99 301801G 7/07 ..
A 7308.90.00 Steel mesh barrier adjustable temporary edge protection system to Free Free 99 301833E 8/07 ..
BS EN 13374 2004, class A and B
X 7326.20.19) Steel fibres of a type used for reinforcing concrete Free Free 99 994325A 11/96 ..
7326.90.09)
X 8201.30.01 Rakes and hoes, snaplock fitted Free Free 99 301769K 6/07 ..
A 8479.89.00 Heat exchanger and condenser tube inner surface cleaning units, using flexible Free Free 99 301835A 8/07 ..
sponge rubber balls
X 87.08 Parts and accessories of motor vehicles falling within Tariff heading No. 87.01, Free Free 99 301867K 10/07 ..
87.02, 87.03, 87.04 or 87.05
EXCLUDING:
Adaptor plates to fit Isuzu and Cummins engines
Air dams
Automatic transmission oil coolers other than aluminium wafer type coolers and
amphibious vehicle automatic transmission oil coolers
Axle assemblies for trailer and tag operation viz: axle beams, axle spindles,
brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins,
brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft
brackets, dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs
(stud and spoked), brake drums
Bonnetguards
Bull bars
Canopies
Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of Tariff
heading 87.16)
Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts. (The
nose cut of a motor vehicle is the front panel assembly forward of and including
the radiator support rail but not including the radiator.
Radiators included in the nose cut remain subject to duty. Bum cuts of motor
vehicles comprise only the rear bumper, rear panel and rear lights)
Disc brake pad assemblies and disc pad kits
Door control systems, air, air-bleed or vacuum operated, viz: single/double folding
(jacknife), single/double gliders
Engines
Exhaust pipes
Exhaust systems (comprising piping and mufflers)
External luggage racks
Glare stops
Headlight covers
Melt sheet, cut to shape
Moulded wellside deckliners other than those for Chevrolet and Ford F series
vehicles
Radiator cores and assemblies
Seat belts
Spoilers of plastic
Towballs
Upholsterers materials (such as flock, wadding, batting, fluting, linters, padding,
foam) cut, moulded or fabricated to shape
Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or fabricated
to shape
Weathershields
Wheel spinners for use on steering wheels
Wheels of magnesium, aluminium alloys, (less than 17” (43.18cm) in diameter),
whether one piece construction or composite with tyres thereon
Wheels of steel with tyres thereon (excluding; space saver wheels, with tyres
attached, of the following sizes, viz:
T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15,
T125/70D16), and, excluding; steel truck and bus wheels with tyres attached,
with an internal rim diameter of 440mm or greater
(Note: while wheels of magnesium or aluminium alloys may be admitted under this
concession, any tyres fitted thereto must be entered under their substantive
Tariff item, and are subject to the rate of duty applicable to that item)
A 8716.80.09 Horse-drawn carriages Free Free 99 301834C 8/07 ..
A 9506.91.00 Caged rings, of a kind used in the performance of martial arts Free Free 99 301723A 5/07 ..


Tariff Concession Approvals, Withdrawals and Declines Notice No. 2007/38 – continued


SECOND SCHEDULE
Concession Approvals Subject to Prescribed Purposes and Conditions
Part
Tariff Rates of Duty II Ref. Effective
Item Description of Goods Normal Pref. Ref. No. From To

IM 5112.11.08 58% wool, 42% viscose – 600m2 Free Free 99 301868H 9/07 5/08
5112.11.08 100% wool – 300m2
5112.11.08 100% wool – 500m2
5112.11.08 100% wool – 600m2
5112.11.08 100% wool – 600m2
5112.11.08 100% wool – 900m2
5112.11.08 100% wool – 1500m2
5112.11.08 100% wool – 1500m2
5112.11.08 100% wool – 5000m2
5515.13.29 55% polyester, 45% wool – 750m2
IM 6006.10.19 100% knitted woollen fabric article 1976 – 2000 metres Free Free 99 301829G 8/07 7/08


THIRD SCHEDULE
Concession Approvals Withdrawn
Part
Tariff Rates of Duty II Ref. Effective
Item Description of Goods Normal Pref. Ref. No. From To

7326.90.09 Steel . . . concrete .. .. .. 994325A .. ..
8201.30.00 Rakes . . . fitted .. .. .. 301769K .. ..
87.08 Parts . . . item) .. .. .. 301867K .. ..


FOURTH SCHEDULE
Applications for Concessions Declined
Tariff Ref.
Item Description of Goods No.

5112.11.08 90% wool, 10% polyester – 1000m2 301816E
5112.11.08 100% wool – 5000m2
5112.11.08 100% wool – 4000m2
5112.30.08 60% wool, 40% polyester – 5000m2


Category of Approval: A – General Approval
CE – Capital Equipment
GT – Goods in Transit
IM – Inputs to Manufacturing – Inability to Supply
MS – Manufacturers’ Samples
RUC – Revocation of Unused Concession
S – Shortfall of Other Than Manufacturing Inputs
SMI – Shortfall of Manufacturing Inputs
SS – Special Situation
V – Variation of Existing Concession
X – Administrative Amendment


The concessions approved subject to prescribed purposes and conditions as listed in the Second Schedule to this notice and declined applications listed in the Fourth Schedule to this notice will not be published in the Consolidated List of Approvals.

Dated at Wellington this 4th day of October 2007. V.A. MANKS, Ministry of Economic Development.