Applications Advertised for Objection
Closing Date for Objections 6th April 2004

1 Notice is hereby given that the following applications have been made in respect of the goods advertised in the Schedule to this notice. Any person wishing to lodge an objection should do so in writing, to the Ministry of Economic Development, PO Box 1473, Wellington, Fax 0-4-474-2843 indicated by the reference number, before 6th April 2004. All submissions should include:
- the Tariff Industry Assistance (Advertisement) Notice number; the Tariff item; and
- Reference number.
2 All submissions from local manufacturers should include:
- the range of alternative goods made locally;
- the grounds on which objection is made (including reasons why the local product is a suitable alternative);
- present and potential output;
- details of factory cost in terms of materials, labour, overheads, including the proportion of domestic and imported content.
3 Where further information is required in order to make a submission an objector should contact the applicant in writing and refer a copy of the enquiry to the Ministry of Economic Development quoting the details in paragraph 1 above.

Part Appn. *Category
Tariff Name and Address II Ref. of
Item Description of Goods of Applicant Ref. No. Appn.

3402.90.00 Stepantex softening agents Interchem Agencies Ltd 99 300014B A
C/- North Harbour Customs Agents Ltd
PO Box 100172
NORTH SHORE MAIL CENTRE

3506.91.00 CURRENT APPROVAL:
Krones colfix HM414 and HM1195 synthetic polymer based hot melt 99 994693E V
adhesives

3506.91.00 REQUESTED APPROVAL:
Krones colfix, sanicare HM, purmelt and euromelt synthetic polymer Henkel NZ Ltd 99 300015L V
based hot melt adhesives C/- AquaAir Freight Services
PO Box 53062
AUCKLAND AIRPORT

3923.29.15 2,000,000 only printed retort pouches of plastic, period 10/03 to 10/04 RPD Produce 99 300018E IM
C/- UTI New Zealand Ltd
PO Box 53012
AUCKLAND AIRPORT

3923.29.15 Welded seam, laminated, plastic stand up pouch with screw cap, Cas Pak Products Ltd 99 300017G IM
period 3/04 to 9/04 C/- PO Box 53012
AUCKLAND AIRPORT

4202.92.09 Spun bonded non woven polypropylene bags with loop handles Elldex Packaging 99 300013D A
PO Box 53004
AUCKLAND AIRPORT

87.08 CURRENT APPROVAL:
Parts and accessories of motor vehicles falling within Tariff heading 99 999684C V
No. 87.01, 87.02, 87.03, 87.04 or 87.05
EXCLUDING:
Adaptor plates to fit Isuzu and Cummins engines
Air dams
Arm rests
Automatic transmission oil coolers other than aluminium wafer type coolers
and amphibious vehicle automatic transmission oil coolers
Axle assemblies for trailer and tag operation viz: axle beams, axle spindles,
brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins,
brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft
brackets, dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs
(stud and spoked), brake drums
Bonnetguards
Bull bars
Canopies
Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of
Tariff heading 87.16)
Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts.
(The nose cut of a motor vehicle is the front panel assembly forward of
and including the radiator support rail but not including the radiator.
Radiators included in the nose cut remain subject to duty. Bum cuts of motor
vehicles comprise only the rear bumper, rear panel and rear lights)
Disc brake pad assemblies and disc pad kits
Door control systems, air, air-bleed or vacuum operated, viz: single/double
folding (jacknife), single/double gliders
Engines
Exhaust pipes
Exhaust systems (comprising piping and mufflers)
External luggage racks
Glare stops
Headlight covers
Interior trim components of hardboard, cardboard or similar materials, leather or
plastic sheetings, cut to shape
Melt sheet, cut to shape
Moulded wellside deckliners other than those for Chevrolet and Ford F series vehicles
Mufflers, silencers, resonators
Radiator cores and assemblies
Seat belts

Tariff Industry Assistance (Advertisement) Notice No. 2004/10 - continued

Part Appn. *Category
Tariff Name and Address II Ref. of
Item Description of Goods of Applicant Ref. No. Appn.

Spoilers of plastic
Towballs
Upholsterers materials (such as flock, wadding, batting, fluting, linters,
padding, foam) cut, moulded or fabricated to shape
Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or
fabricated to shape
Weathershields
Wheel balance weights
Wheel spinners for use on steering wheels
Wheels of magnesium, aluminium alloys, (less than 17" (43.18cm) in
diameter), whether one piece construction or composite with tyres thereon
Wheels of steel with tyres thereon (excluding; space saver wheels, with
tyres attached, of the following sizes, viz:
T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15,
T125/70D16)
(Note: while wheels of magnesium or aluminium alloys may be admitted
under this concession, any tyres fitted thereto must be entered under their
substantive Tariff item, and are subject to the rate of duty applicable to that item)

87.08 REQUESTED APPROVAL:
Parts and accessories of motor vehicles falling within Tariff heading The Bays Box Company 99 300012F V
No. 87.01, 87.02, 87.03, 87.04 or 87.05 C/- Richard Beachman Ltd
EXCLUDING: 506 Beach Road
Adaptor plates to fit Isuzu and Cummins engines Murrays Bay
Air dams AUCKLAND
Arm rests
Automatic transmission oil coolers other than aluminium wafer type coolers
and amphibious vehicle automatic transmission oil coolers
Axle assemblies for trailer and tag operation viz: axle beams, axle spindles,
brake shoes, camshafts, brake spiders, back plate assemblies, brake shoe pins,
brake shoe springs, brake shoe rollers, bushes, bearing housings, camshaft
brackets, dust covers, wheel studs, wheel nuts, axle nuts, axle washers, hubs
(stud and spoked), brake drums
Bonnetguards
Bull bars
Canopies
Couplings, trailer and truck (other than semi-trailer fifth wheel couplings of
Tariff heading 87.16)
Cut segments of motor vehicles apart from nose cuts and bum (rear) cuts.
(The nose cut of a motor vehicle is the front panel assembly forward of
and including the radiator support rail but not including the radiator.
Radiators included in the nose cut remain subject to duty. Bum cuts of motor
vehicles comprise only the rear bumper, rear panel and rear lights)
Disc brake pad assemblies and disc pad kits
Door control systems, air, air-bleed or vacuum operated, viz: single/double
folding (jacknife), single/double gliders
Engines
Exhaust pipes
Exhaust systems (comprising piping and mufflers)
External luggage racks
Glare stops
Headlight covers
Interior trim components of hardboard, cardboard or similar materials, leather or
plastic sheetings, cut to shape
Melt sheet, cut to shape
Moulded wellside deckliners other than those for Chevrolet and Ford F series vehicles
Mufflers, silencers, resonators
Radiator cores and assemblies
Seat belts
Spoilers of plastic
Towballs
Upholsterers materials (such as flock, wadding, batting, fluting, linters,
padding, foam) cut, moulded or fabricated to shape
Upholsterers textiles, fabrics, leather, or plastic sheetings, cut, moulded or
fabricated to shape
Weathershields
Wheel balance weights
Wheel spinners for use on steering wheels
Wheels of magnesium, aluminium alloys, (less than 17" (43.18cm) in
diameter), whether one piece construction or composite with tyres thereon
Wheels of steel with tyres thereon (excluding; space saver wheels, with
tyres attached, of the following sizes, viz:
T105/80D13, T105/70D14, T115/70D14, T125/70D15, T135/90D15,
+ T125/70D16), and, excluding; steel truck and bus wheels with tyres attached,
+ with an internal rim diameter of 440mm or greater
(Note: while wheels of magnesium or aluminium alloys may be admitted
under this concession, any tyres fitted thereto must be entered under their
substantive Tariff item, and are subject to the rate of duty applicable to that item)

9608.39.09 Pens, water based, dual brush (i.e., a tip at one end and brush at the other) Geoff Penney NZ 99 300016J A
C/- PO Box 2807
AUCKLAND 1


Tariff Industry Assistance (Advertisement) Notice No. 2004/10 - continued


* Category of Application: A - General Approval
CE - Capital Equipment
IM - Inputs to Manufacturing - Inability to Supply
MS - Manufacturers' Samples
RUC - Revocation of Unused Concession
S - Shortfall
SS - Special Situation
V - Variation of Existing Concession
W - Withdrawal of Concession
+ - Denotes amendment or addition


Dated at Wellington this 11th day of March 2004. V.A. MANKS, Ministry of Economic Development.