Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990 Pursuant to regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, James Lindsay Graham Bell, Vehicle Compliance Officer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3. Schedule 1 Vehicle details Make: Porsche Model: 928 S Year of Manufacture: 1981 VIN: WPOZZZ92ZBS840870 Schedule 2 Exempted requirements Regulation 29 (1) (c) Schedule 3 Conditions (i) The items specified in Schedule 2 must be in sound condition and good working order and must not be modified in any way; (ii) (a) Two-point lap seat belts that comply with the appropriate vehicle standard are fitted in the rear outboard sitting positions; (b) All other sitting positions are fitted with the seat belts required by regulation 29; (iii) All seat belts must be securely anchored to the vehicle and seat belt anchorages that are not the vehicle manufacturer's original equipment must comply with Specifications St 120395 and/or St 31391 (IMVDA type testing programme), if applicable; (iv) This exemption may be revoked at any time; (v) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection. Signed at Wellington this 22nd day of April 1998. JAMES LINDSAY GRAHAM BELL, Vehicle Compliance Officer, acting under the authority delegated to me by way of instrument of delegation dated 23 December 1996.