Exemption From Specified Requirements of the Transport (Vehicle Standards) Regulations 1990 Pursuant to regulation 36 of the Transport (Vehicle Standards) Regulations 1990, I, John Andrew Justice, Senior Engineer, hereby exempt the motor vehicle specified in Schedule 1 of this notice from the requirements of the Transport (Vehicle Standards) Regulations 1990 listed in Schedule 2, subject to the conditions specified in Schedule 3 of this notice. Schedule 1 Vehicle Details Make: Alfa Romeo Model: SZ Year: 1962 Chassis No.: AR10126-00201 Schedule 2 Exempted Requirements Regulation 29 (1) (a), (1) (c), (2), (3), and (4) Regulation 32 (3) Regulation 33 (3) Regulation 34 (1), (3) Schedule 3 Conditions (i) The vehicle's original equipment seat belts are fitted in the front seating positions and lap seat belts that comply with an approved vehicle standard are fitted in the rear seating positions. (ii) The seat belts are in good condition and not repaired or modified in any way. (iii) Any replacement seat belt must comply with an approved standard. (iv) Door locks and hinges shall not be modified from the original manufacturer's specifications. (v) The steering column and associated mountings shall not be modified from the original manufacturer's specifications. (vi) The interior fittings, fitments, and controls in the passenger compartment shall not be modified from the original manufacturer's specifications. (vii) This exemption may be revoked at any time. (viii) A copy of this notice must be carried in the vehicle at all times and be readily available for inspection. Signed at Wellington this 5th day of February 1997. J. A. JUSTICE, Senior Engineer, acting under authority delegated to me by way of an instrument of delegation, dated 23 December 1996.